Specifications include, but are not limited to: General Requirements: 3.1.1.1. The Siamese Type Cable shall contain both Double Braid 75 Ω Belden 8281 Coax Cable and a 16/3 Power Cable as described in the paragraphs below. 3.1.1.2. The Cable can be an equal to the Belden 8281 as long as the equal meets the Belden specs is approved before awarding. 3.1.1.3. Insulation: PVC – Black, Minimum 1% Carbon Black (CB), UV Stable, Sun Resistant. 3.1.1.4. Continuous Temperature Rating: 90 degrees C, as specified in AS/NZS 3808. 3.1.1.5. Print on External Insulation: “16/3 Power with 75 OHM Video Coax “Sun Res”, Direct Burial, Mfg. by ____________”. 3.1.1.6. All cable jacket and insulation materials shall be sun resistant and direct burial type. 3.1.1.7. All wire insulation shall be UV stable. 3.1.1.8. Cables shall be delivered on a reel in the request length, continuous and uncut. 3.1.1.9. The material used shall comply with all City, State and Federal Laws, municipal ordinances and regulations. Belden 8281, Double Braided Coax Cable Requirements: 3.1.2.1. Nominal Imped: 75 Ω 3.1.2.2. AWG: 20AWG, .031 Sol BC. 3.1.2.3. Dielectric: Polyethylene 3.1.2.4. Nominal Wall: .084 3.1.2.5. Braid: 2 @ 98% Tinned Copper 3.1.2.6. Insulation: PVC-Black, Minimum 2% Carbon Black, UV Stable, and Sun Resistant 3.1.2.7. Nominal OD: .304 3.1.2.8. Nominal Cap: 21 pf/ft. 3.1.2.9. Nominal Attenuation