Specifications include, but are not limited to: Short Sleeve Medium Base Layer Shirt This is a short sleeve, ribbed collar, sand in color, and pocket less, pull over t-shirt. This shirt will not have any embroidery added to the garment. The specifications for the shirt shall be as follows: Garment shall be constructed to a minimum 5.4 oz. fabric weight Material shall be a blend of 75% Modacrylic 15% Lyocell 10% Nylon which provides moisture management, comfort, and odor control. Materials and Construction shall comply with ASTM F1506; NFPA 70E; and CAT 1 with a EBT 4.5 Cal/cm2 rating. Provide Spec Sheet with Submission 5 EA $ $ Short Sleeve Large Base Layer Shirt This is a short sleeve, ribbed collar, sand in color, and pocket less, pull over t-shirt. This shirt will not have any embroidery added to the garment. The specifications for the shirt shall be as follows: Garment shall be constructed to a minimum 5.4 oz. fabric weight Material shall be a blend of 75% Modacrylic 15% Lyocell 10% Nylon which provides moisture management, comfort, and odor control. Materials and Construction shall comply with ASTM F1506; NFPA 70E; and CAT 1 with a EBT 4.5 Cal/cm2 rating. Short Sleeve X-Large Base Layer Shirt This is a short sleeve, ribbed collar, sand in color, and pocket less, pull over t-shirt. This shirt will not have any embroidery added to the garment. The specifications for the shirt shall be as follows: Garment shall be constructed to a minimum 5.4 oz. fabric weight Material shall be a blend of 75% Modacrylic 15% Lyocell 10% Nylon which provides moisture management, comfort, and odor control. Materials and Construction shall comply with ASTM F1506; NFPA 70E; and CAT 1 with a EBT 4.5 Cal/cm2 rating. Short Sleeve 2XL Base Layer Shirt This is a short sleeve, ribbed collar, sand in color, and pocket less, pull over t-shirt. This shirt will not have any embroidery added to the garment. The specifications for the shirt shall be as follows: Garment shall be constructed to a minimum 5.4 oz. fabric weight Material shall be a blend of 75% Modacrylic 15% Lyocell 10% Nylon which provides moisture management, comfort, and odor control. Materials and Construction shall comply with ASTM F1506; NFPA 70E; and CAT 1 with a EBT 4.5 Cal/cm2 rating. Short Sleeve 3XL Base Layer Shirt This is a short sleeve, ribbed collar, sand in color, and pocket less, pull over t-shirt. This shirt will not have any embroidery added to the garment. The specifications for the shirt shall be as follows: Garment shall be constructed to a minimum 5.4 oz. fabric weight Material shall be a blend of 75% Modacrylic 15% Lyocell 10% Nylon which provides moisture management, comfort, and odor control. Materials and Construction shall comply with ASTM F1506; NFPA 70E; and CAT 1 with a EBT 4.5 Cal/cm2 rating.