Specifications include, but are not limited to:: Roof Plumbing Electrical 00-000 GENERAL CONDITION: Comments: GC to strip all layers of shingles. PU 07-303 MSRP - ROOF, ALL LAYERS & DECK/LATH TO FRAME:: 07-303: To include but not limited to removal and disposal of all roofing debris, Installation of all decking in accordance with 07-315B, composition shingles in accordance with 07-310 and 14" wind turbines to accommodate the attic space in accordance with 10-210(E). Comments: with 10% waste SQ 16-600J . MSRP - ELECTRICAL-SERVICE PANEL - 200 AMP: 16-600J: COMPLETE with green tag. (Install/Replace). Installation is to include 200 amp service panel, meter box, service mast, mast head ,etc. and sealing of all holes and penetrations such as flashing and sealant. Installation will include re-connection fee. Permit must reflex the actual work being performed such as electrical panel (service upgrade, etc.). These can be indicated under the notes section on the online application. All materials and/or equipment demolished or repaired are considered salvage and belong to the homeowner for use or disposal unless the homeowner relinquishes salvage rights to the contractor (Contractors Bid Accordingly). The contractor must remove all unwanted material and debris. EA 15-424B .MSRP - WATER HEATER, ELECTRIC: 40 Gallon Complete with Permit and Green Tag: 15-424: Installation of domestic water heater with a 6 yr. warranty on all parts and meet current codes and Section 15 – Plumbing – Water Heater. To include electrical disconnect, water valves, "T&PR" valves with 3/4" relief line, and drain pan and drain line to exterior. Contractor, list equipment to be installed. BRAND:____________________ EA 16-600A MSRP - ELECTRICAL-RE-WIRE ENTIRE STRUCTURE, COMPLETE with Permit and Green tags: Refer to specification: 16-600A: To include finish out of patch work as per 16-023 SF 16-600X MSRP - ELECTRICAL-EXHAUST FAN/HEATER COMBO:: 16-699X: Install/Replace new or existing exhaust fan/heater and vented to the exterior not attic or crawlspace. Vent must meet mechanical codes. EA