Specifications include, but are not limited to: UNIFORM PANTS -BLAUER 8810X 6 POCKET TROUSER OR EQUAL COLOR: NAVY. FABRIC: Trousers shall be manufactured with the following fabric: Blend: 65% Dacron Polyester, 35% combed cotton with 10% mechanical stretch Weave: Twill Weight: 6.7 oz/yd. Finish: Pre-cure permanent press with soil release finish INTERNAL CONSTRUCTION FABRIC: Pockets, waistband and fly lining shall be: Blend: 65% Dacron Polyester, 35% cotton Weave: Twill Weight: 5.2 oz/yd. Color: Dark Grey Finish: Pre-cure permanent press WAIST CLOSURE: Primary waist closure is a double hook and eye construction mounted on the waistband using rustproof nickel plated steel hardware as follows: Size 85 Eye and Eye internal reinforcement plate. Size 8 hook and hook internal reinforcement plate. Metal snaps which may become burred or crushed and cannot be replaced as unacceptable. In addition to Hook and Eye plates, the construction includes the additional internal reinforcement of 7/8” tape mounted between the plates and the body fabric to insure construction integrity for extended wear life. Waist closure appearance is further guaranteed by mounting a #22 ligne black four-hole button/buttonhole closure 1” below the waistband on the left and right fly construction of fly tab. SIDE FASTENER: Slide fastener (fly zipper) consists of Delrin coil YKK hardware mounted on colorfast black blend nylon and cotton 7/16” tape, Coil size #5. FLY CONSTRUCTION: The right inside fly is reinforced with internal construction fabric and 1/8” gauge top stitched along the entire exposed edge to insure shape retention for extended wear life. The left, outside fly is fully lined internally for shape retention. Right and left fly are joined together at the base of the fly. The joined fly form a reinforcing tailpiece construction fully extending along the crotch seam to its intersection with leg inseams.