Specifications include, but are not limited to: 17’ ALUMINUM ALL WELDED BOAT SPECIFICATIONS: 3.1. Example: Rockproof River Jett, SJX 2170, or other TPWD approved equal 3.2. Requirement: Boat must conform to 33CFR, Code of Federal Regulations (Part #183) 46 U.S. Code §4307– Prohibits Act 3.3. Length: approximately 17-20 foot 3.4. Beam: approximately 60-72 inches 3.5. Bottom Width: approximately 60-72 inches, 3/16 inch bottom thickness 3.6. Side Depth: approximately 24-30 inches, 1/8 inch thickness 3.7. Transom: Approximately 0.125” inch thickness 3.8. Intake and Tunnel: approximately 0.190 (3/16) inch thickness 3.9. Horsepower: 200 HP Jet Drive 3.10.Weight: approximately 1400-1800 pounds 3.11.Fuel Capacity: maximum 30 gallons 3.12.Aluminum floors and all deck surfaces thickness: approximately .125 (1/8 Inch 3.13.All floors and deck hatch lids shall be coated with bed-liner material 3.14.Hull: 3.14.1. Shall have an approximate 1/2 inch thick bonded and fasteners UHMW hull protector 3.14.2. Shall have Zero skip welding on all Forward to Aft hull stiffeners and Box Runners full length continuous welds 3.14.3. Box runners shall be 0.125 (1/4) Inch Full Length 3.15.Console Assembly 3.15.1. Console Assembly: center console with storage tray and aluminum leaning post with cushion 3.15.2. Complete multi-function instrument package with fuel gauge and tachometer 3.15.3. Single lever control Shift/Throttle Combo with Neutral Safety Switch: lanyard tether kill switch 3.16.Required Options: 3.16.1. Sand trap 3.16.2. Anchor Cleat in Bow 3.17.Emergency Lighting: boat shall be equipped with flashing blue emergency LED lighting equipment visible from 360 degrees 3.18.Color of boat to be selected after award from manufacturer’s standard colors