Specifications include, but are not limited to: a. Company is to design, manufacture, test, deliver to the site, and assist in the startup of a new wastewater packaged pump station and an aeration system according to the requirements listed herein and details shown in the design drawing in Appendix A. i. The new wastewater packaged pump station will be installed outdoor on top of a wet well with inside diameter of 5’ – 0”. ii. The aeration system will be installed next to the wet well. b. Goods to be provided: i. One “Everlast Series 1000” wastewater packaged pump station manufactured by Smith & Loveless. The wastewater packaged pump station shall be equipped with two 100% vertical, above ground, self-priming pumps with all necessary equipment and controls. ii. One new aeration system with necessary equipment and control that will be interfaced with the wastewater packaged pump station for controlling odor generated in the wet well. a. Design Basis for Packaged Pump Station. The wastewater package pump station shall be composed of two (2) 100% capacity pumps with the following details: i. Type of pumps: Vertical, Non-Clog, above ground, self-priming pump ii. Material for base plate: stainless steel iii. Power supply source for the pumps: 480V/ 3-phase/ 60 Hz iv. Flow: 80 GPM per individual pump v. TDH: 140 feet vi. Maximum Static Suction Lift: 15 feet b. Wastewater Packaged Pump Station Requirements i. Electric motor driving the pumps shall meet the following requirements: 1. Motor shall be driven by a 480V/3 phases/60 Hertz power source 2. Motor efficiency shall be 96% or better 3. Motor shall be TEFC as standard 4. Motor shall have class F insulation 5. Motor shall have a service factor of 1.15 ii. The wastewater packaged pump station shall be equipped with a PLC-based control module that controls all operation and monitors and protects all components of the station. All control functions shall be managed from a central control panel. This panel shall be capable of providing information and adjustments to operating parameters to allow safe operation of the compressor. iii. The station shall be in an enclosure that is that is made with materials suitable for outdoor service in harsh weather conditions. iv. The complete pump station and related equipment shall be rated for NEMA 4.