Specifications include, but are not limited to: The Nevill Road Switching Station project is located in Pecos County, Texas. The 345-kV substation will be constructed approximately 5.6 miles southeast of Girvin, Texas. The station will consist of tapered tubular dead end A-frame structures and static masts, and square tube structures supporting bus, switches, and other necessary equipment. All structures will require anchor assemblies. SCHEDULE Supplier is to provide pricing for the following GP&L delivery dates. If Supplier cannot commit to the dates, Supplier shall instead propose an expedited schedule with pricing. Supplier pricing must be valid for 40 days after bid close. Delivery Dates: - Nevill Road Anchor Assemblies, All Structures: February 14, 2020 - Nevill Road Standard Steel Structures: April 10, 2020 - Nevill Road Tapered Tubular Steel Structures: May 22, 2020 STRUCTURE OPTION PACKAGES Supplier is to provide separate pricing for the each of the following structure packages, as outlined in the attached Bid Units. Option 1 shall include the following structures: - Dead end A-Frame & Anchor Cages - 85’ Static Mast & Anchor Cages - 345kV 3-Phase Switch Structure & Anchor Assemblies - 345kV 1-Phase Bus Support Structure (Short) & Anchor Assemblies - 345kV 1-Phase Bus Support Structure (Tall) & Anchor Assemblies - 345kV 1-Phase CCVT Support Structure & Anchor Assemblies - 345kV 1-Phase SSVT Support Structure & Anchor Assemblies - 345kV 1-Phase C.M.U. Support Structure & Anchor Assemblies - 345kV Switch Structure Bus Support Adapter Option 2 shall include the following structures: - Dead end A-Frame & Anchor Cages - 85’ Static Mast & Anchor Cages - 345kV 3-Phase Switch Structure & Anchor Assemblies - 345kV 1-Phase Bus Support Structure (Short) & Anchor Assemblies - 345kV 1-Phase Bus Support Structure (Tall) & Anchor Assemblies