Specifications include, but are not limited to: Any new irrigation system, any extension to an existing irrigation system, and/or any replacement of an existing irrigation system must be installed by an irrigator who is licensed as such by the Texas Commission on Environmental Quality. Prior to installing a new irrigation system or installing/replacing a backflow device, the irrigator shall obtain a permit from the Building Inspection Department. Permit fees are waived for city projects. To obtain a permit, the irrigator must register with Building Inspections. The irrigator must present his/her TCEQ irrigator’s license and a government issued picture ID. A registration fee must be paid even when the work is for the city. It is the irrigator’s responsibility to design and install the system in conformance with the currently adopted TCEQ “Standards for Landscape Irrigation” as published in the TCEQ rules. Additionally, the irrigation system shall meet the City of Garland Water Conservation Plan, as published as Article VIII, Chapter 51 of the City of Garland Code of Ordinances. The Contractor shall be responsible for repairing to existing or better condition any irrigation systems disturbed outside the designated work zone or in staging areas at his own expense.