Specifications include, but are not limited to: 1. General Requirements The Contractor shall: a. Be expected to provide all labor, equipment, supplies, materials, superintendence and testing necessary for completion of the work, subject to the terms and conditions of the contract. The Contractor shall complete such details of work for the successful operations of area service was performed. b. If subcontractors are utilized, the subcontractors will be directed and supervised by the Contractor. The District reserves the right of refusal where subcontractors are not performing in accordance with the requirements of this contract. c. All work is to be done in a neat and orderly manner, in accordance with industry standards and/or required code. d. All work shall be scheduled as to be safe and shall not interfere with classed or meetings in any way unless approved by the District Project Manager or Director of Facilities and Construction. e. Normal district working hours are Monday through Friday, 7:30 A.M to 5:00 P.M. Although services under this contract may be performed during these hours, the contractor may often be required to work outside these hours. f. At the start of a project, the Contractor shall provide the project manager with the telephone number(s) of the person or persons to be called in case of an emergency. DRIPPING SPRINGS ISD JOB ORDER CONTRACT (JOC) FOR MINOR CONSTRUCTION TRADES 510 W. Mercer St., P.O. Box 479, Dripping Springs, Texas 78620-0479 Phone 512.858.3000 www.dsisdtx.us Fax 512.858.3099 g. The Contractor shall provide time schedules if requested by the district. h. Projects with a scope of work requiring construction documents and/or drawings prepared by project engineer/architect must adhere to the district General Conditions - Contract for Construction provided in Appendix D. The requirements of the project will be determined within the scope of work and prior to work authorization. 2. Purchase of Parts / Equipment for Installation a. Parts / equipment will be warranted by the Contractor for a period equal to or greater than the manufacturer’s standard warranty. If no manufacturer’s warranty is given, a minimum one year warranty from date of substantial completion and acceptance by the District must be provided. b. The Contractor shall, unless otherwise indicated, provide only new parts and / or equipment and materials. The District may specify equipment based on the District’s requirements for standardization and / or history with a particular brand / model. 3. Commencement of Work a. Contracts for services will be put into effect by means of purchase orders executed by the District. The conditions stated herein are applicable and form a part of all contract documents and a part of the terms of all subsequent purchases for services to be provided. b. Upon receipt of the scope of work provided by the District, the Contractor shall submit a Project Proposal form (see Appendix C for example) based on the contract pricing. c. All work shall commence upon acceptable work statements and schedules supplied by the Contractor and agreed in writing by the District. The District may incorporate a Job Order Work Authorization form (see Appendix B for example) for use in addition to purchase orders for the purpose of identifying scope of work, timeline, cost, based on the contractor’s project proposal and providing work authorization. d. The Contractor shall provide to the project manager progress reports indicating current status of all assigned projects to include verification of work schedule and percentage of project completion. This progress rep