Specifications include, but are not limited to: (a) Cleaning ‐ The removal of dirt, soil, stains, liquids, trash, refuse, and any other foreign material from an item, fixture or area. Cleaning may include the process of disinfecting, if required by SPB. When properly cleaned by Contractor, an area, fixture or item shall be free of all dirt, soil, stains, or other foreign material and shall present a clean, safe healthy and appealing appearance. All chemicals used must be submitted to the Contractor Administrator for prior written approval and be accompanied by SDS and manufacturers cut sheets. (b)Sweeping ‐ The removal of loose dirt, dust, debris, and other foreign material through either manual or mechanical methods, as appropriate for the location and situation. When properly completed by Contractor, a swept of vacuumed area shall be free of all loose dirt, dust, debris, or other foreign material with no build up in corners, crevices, or under or around furniture. (c)Wet Mopping ‐ The removal of dirt, soil, liquids, or other foreign materials from a floor using a cotton/rayon blended, or similar yarn type mop, or microfiber flat mop and sufficient neutral detergent and water solution or neutral disinfecting detergent and water solution.