Specifications include, but are not limited to: The Department of Public Safety (DPS) is requesting bid responses for Asphalt Surface and Pavement Marking Remediation at The Florence Tactical Training Center – Driving Skills Track. A. Asphalt paving surface preparation which entails removing dust, dirt, oil, laitance, curing compounds, concrete sealer, etc. from surface by power wash, acid etch, grit blast or profiling equipment. The prepared surface should be clean, dry, hard/dense, and slightly roughed. B. Remove all unsound asphalt by routing area to a minimum of one and one-half (1-1/2) inches beyond each side of the damaged area. C. Remove and repaint pavement markings as delineated with provided facility map/diagram. NOTE: All areas to be saw-cut or routed should be rectangular and have clearly defined edges and vertical cut to minimum 1-1/2-2 inches depth depending on nature of damage.