Specifications include, but are not limited to: Tank: Tank capacity: 200 gallon molded polyethylene tank Minimum liquid specific gravity (sg) capacity: not less than 1.9 U. V. Protected with a density of .942 8 molded in baffles Bulkhead fitting: 2 inches Tank profile rectangular tank 27” h x 46” w x 44” ; Skid/frame: Heavy constructed 7 gauge formed steel frame, full welded Frame to have fork lift holes to load and unload from vehicle Designed to fit in the bed of a standard size pickup truck – between the wheel wells and with tailgate closed Skid frame: fully hot dipped galvanized Rear panel to support pump assembly and all plumbing and manifolds, accessible from back of truck Fully welded, hot dipped galvanized frame Control assembly: In cab 3 lane tee jet control panel varitech # 1128967 or TxDOT approved equal Open loop system 3-lane, individual electric lane valves Spray bar: 3 lane coverage Frame shall have bracket for spray bar to be mounted when not in use or being stored to prevent bar from damage Spray bar is made to fit in a receiver hitch and be adjustable in height ; Main bar with interchangeable plastic nozzle assemblies and installation brackets Pump/engine and plumbing assembly: Centrifugal pump with 110 gpm at full discharge 5.5 hp electric start engine Manifold flange fittings and quick fill , and discharge arrangement 2” y-strainer with serviceable stainless steel cartridge Hose reel: Hose & reel kit: 50’ rubber hose with nozzle ½” hose spring retract ; Brand:Varitech Industries Inc Part# 1115483 – CSS200-EGO-3HSNN with 1128967 switch package or TxDOT approved equal.