Specifications include, but are not limited to: Contractor shall remove the damaged body from chassis with rail gate and dispose of box. Contractor shall ensure furnishing is 26’ van body with rear rollup door. Contractor shall remove rail gate from damaged body and change to new used body. Contractor shall run new cable. Contractor shall mount used body on chassis with new U-bolt and risers. Contractor shall remove flooring and scuff liner from damaged body. Contractor shall reinstall in new/used body box. Contractor shall weld and grind weld to lay smooth. Contractor shall recess all screws to cross members of the body. Contractor shall complete repairs of box that attaches to the F750Box Truck. Contractor shall ensure that repainting of the rear header and door are performed. Contractor shall ensure all repainting restores the vehicle to its original state. Contractor shall ensure all repairs needed are made to a new or used box. Contractor shall ensure that DOT (Department of Transportation) tape has been added on the box sides, rear and front.
