Line 1: Truck Mounted Attenuators (TMA) Referenced Manufacturer/Model No. or Equal: TrafFix Devices, Inc. Model C TL-3 TMA (scorpion II model) MASH Verdegro BLADE TMA Valtir SAFE-STOP 180®M 1. Product must MASH rated • NOTE: NCHRP-350 Compliant products will be considered if they were manufactured prior to December 31, 2019, and in new condition. 2. Product must be in accordance with Attachment G, Part II, Numbers 2 through 7 Line 2: Replacement Cartridges with Lighting for Line 1 Referenced Manufacturer/Model No. or Equal: TrafFix Devices, Inc. Model C TL-3 TMA (scorpion II model) MASH Verdego BLADE TMA Valtir SAFE-STOP 180®M 1. Must be compatible with Line 1, if bid. 2. Replacement cartridge with lighting per Attachment G, Part II, Numbers 2 and 3 Line 3: Manuals for Line 1 Referenced Manufacturer/Model No. or Equal: TrafFix Devices, Inc. Model C TL-3 TMA (scorpion II model) MASH Verdego BLADE TMA Valtir SAFE-STOP 180®M 1. Manuals must be compatible with Line 1, if bid. 2. Per Attachment G, Part II, Part II, Numbers 5, 6, and 7, the following manuals shall be provided: a. Manual for original set of parts b. Operator’s manuals c. Service manual Line 4: Light Bar, LED, Arrow Board Upright Referenced Manufacturer/Model No. or Equal: 33” Razor Extreme LED Light Bar (33RZREXTR) K-Force 36 TIR Full Sized LED Light Bar (F-TKF36) 1. Optional equipment for Line 1 2. Product must be in accordance with Attachment G, Part III, Number 1.1 Line 5: Strobe Lights, LED, Mid-Point Deployment Referenced Manufacturer/Model No. or Equal: ECCO ED3704-A/ECCO ED3704-B Element 4 TIR LED Grille & Surface Mount Strobe Light 1. Optional equipment for Line 1 2. Product must be in accordance with Attachment G, Part III, Number 1.2 Line 6: Strobe Light Stick, LED, Mid-Point Deployment Referenced Manufacturer/Model No. or Equal: Solarblast 38” 32W LED Strobe Deck Light (SBLS84-AB) Lynx L6-8 Linear Interior/Exterior LED Light Bar 1. Optional equipment for Line 1 2. Product must be in accordance with Attachment G, Part III, Number 1.3 Line 7: Strobe Light Stick, LED, Rear TMA Referenced Manufacturer/Model No. or Equal: Solarblast 47” LED Strobe Traffic Adviser (SBLS104-AM) Tracer 47 TIR LED Full Sized Light Bar 1. Optional equipment for Line 1 2. Product must be in accordance with Attachment G, Part III, Number 1.4 Line 8: Light Bar, LED, Mini, Rear TMA Referenced Manufacturer/Model No. or Equal: 13” Razor Extreme Mini LED Light Bar (13RZREXTR) Mirage 12 TIR LED Mini Light Bar 1. Optional equipment for Line 1 2. Product must be in accordance with Attachment G, Part III, Number 1.5 Line 9: Barricades, Traffic, Portable, PSST Stand Referenced Manufacturer/Model No. or Equal: Three D Traffic Works, Inc TD2550 Three D Traffic Works, Inc TD2650 Cortina Safety Products Telespar Type III Barricade Fender Enterprises Fendercade Pexco, LLC T3B Type III Barricade 1. Type III, Portable Traffic Barricade 2. Rail Sheet Color: Orange/White 3. Rail Sheet Direction: Left or Right, Double Faced 4. Rail Sheet Dimensions: a. Length: 8 feet b. Height: 8 inches 5. Rail Sheet Material: High-Density Polyethylene (HDPE) or Hollow-Profile Plastic Lumber (HPPL) Hi-Impact Rigid PVC (HIRPVC), wood 6. Supports Material: Perforated Square Steel Tubing (PSST) 7. Support Dimensions: a. Height: Minimum 60”, Maximum 70” b. Diameter: 1-1/2 - 2 inches 8. Skid Material: Perforated Square Steel Tubing (PSST) 9. Skid Dimensions: a. Length: Max 60 inches b. Diameter: 1-1/2 - 2 inches 10. Barricades and barricade components substitutions are prohibited and shall be in accordance with the following requirements: a. Plastic components shall be UV stabilized. NOTE: 1.5 inch square, 12-gauge perforated steel tube support stiffener/lower cross-member may be needed on some barricade systems with plastic rails to provide structural support or as stipulated within manufacturer's guidelines. b. Sheeting: Retro-reflective, red/white (R/W) for Type III end and left (L) or right (R) in accordance with Attachment H, and is identified on Attachment I. c. The barricades must be MASH rated. • NOTE: NCHRP-350 Compliant products will be considered if they were manufactured prior to December 31, 2019, and in new condition. Line 10: Water-Filled Barrier Style Longitudinal Channelizing Devices (LCD) Referenced Manufacturer/Model No. or Equal: Valtir, LLC Yodock 2001 TrafFix Water-Wall 1. Water-filled barrier LCD 2. Test Level: TL 2 or TL 3 acceptable 3. Barriers shall connect via interlocking coupler or by connection pin made of plastic or steel 4. Dimensions: a. Length: 6 feet b. Width: 18 - 24 inches c. Height: 32 - 46 inches 5. Empty Weight: 80 - 130 pounds 6. Filled Weight: 1,110 - 1,500 pounds 7. Barrier Capacity: 123 - 180 gallons 8. Barrier Material: Low density polyethylene (LDPE) 9. Barrier Color Options: Red/Orange or White 10. Drain hole and plug 11. Holes to allow maneuverability with forklift 12. LCDs must be MASH rated. • NOTE: NCHRP-350 Compliant products will be considered if they were manufactured prior to December 31, 2019 and in new condition. Line 11: Rumble Strips, Sectional, Temporary, Portable Referenced Manufacturer/Model No. or Equal: Plastic Safety Systems, Inc. Roadquake 2 Folding (RQ2F) Temporary Rumble Strip 1. Dimensions a. Width: Minimum 12 ½ inches b. Length: Full length should be 132 inches, with a minimum of 66 inches when sectioned c. Height: Maximum ¾ inches 2. Weight: Minimum 105 pounds maximum 150 pounds 3. Acceptable Colors: Black, orange, or alternating black and silver 4. Material: Recycled rubber or metal 5. For posted speed limits up to 70 MPH or higher 6. Individual sections shall be linkable 7. Shall contain non-slip grip bottoms to reduce movement while in use 8. Warranty: Rumble strips must be warranted against defective materials, workmanship, and failures for minimum of 12 months from the date of delivery.
