a) Line 1 – Compact Utility Tractor with Required Attachment i) Examples: John Deere 4066M, Mahindra Max 26 XLT, or TPWD approved equivalent ii) Quantity: One (1) iii) Condition: New, current year model iv) Engine Power (Gross): Minimum 25.9 kilowatts at 2500 revolutions per minute, Maximum 48.5 kilowatts at 2600 revolutions per minute v) Power Take Off (PTO) Power: 540 revolutions per minute vi) Steering Hydraulics and Pump Rated Output: Minimum 2.7 gallons per minute and Implement 5.8 gallons per minute, Maximum 6.2 gallons per minute and Implement 11.2 gallons per minute vii) 3-Point Hitch Type: Category 1 viii) Lift Capacity, 24 inches behind link arms: Minimum 2315 pounds, Maximum 2500 pounds ix) Standard Transmission, Forward/Reverse: Hydrostatic Transmission or Synchromesh x) Approximate Shipping Weight (open station; cab): Minimum 1896 pounds, Maximum 4290 pounds xi) Fuel Type: Diesel xii) Cylinders/Displacement: Minimum 3 Cylinders 80.4 cubic inches, Maximum 4 Cylinders 127.6 cubic inches xiii) Fuel Tank Capacity: Minimum 6.1 gallons, Maximum 15 gallons xiv) Battery Size: Minimum 12 Volt, 450 Cold Cranking Amps (CCA), Maximum 770 Cold Cranking Amps xv) Alternator (12-V): Minimum 12 Volt / 50 Amp, Maximum 12 Volt / 75 Amp xvi) Hydraulic Type: Open Center xvii) Power Control: Independent or Trans xviii) Clutch: Wet Disc or Dry-Single xix) Tire Size: Industry standard tire size required, examples: (1) Front: 23 x 8.5-12 or 31.5 X 13-16.5 (2) Rear: 23 x 12-16.5 or R4 Industrial 19.5L-24 xx) Required Attachment: (1) Examples: John Deere RC2060 Lift-Type Rotary Cutter, Titan 3 Point 60 inch Finish Mower, or TPWD approved equivalent (2) Overall Width: Minimum 51 inches, Maximum 61 inches (3) Operating Weight: Minimum 470 pounds, Maximum 512 pounds (4) Tractor Compatibility PTO hp: Maximum 18-50 horsepower (hp) (5) Tractor Compatibility Tractor PTO: 540 revolutions per minute (6) Driveline Type: Shaft with Shear bolt or slip clutch (7) Hitch Type: Lift or Floating hitch (8) Hitch Category: Category 1 (9) Cutting Width Capacity: Minimum 48 inches, Maximum 60 inches (10)Cutting Height Capacity: Minimum 0.4-3.2 inches, Maximum 1.5-9 inches (11)Blade Type: Heat Treaded, Suction or 3 replaceable blades b) Line 2 – Utility Tractor with Required Attachments i) Examples: John Deere 5105M, Case Maxxum 115, Kubota M5-111, or TPWD approved equivalent. ii) Quantity: Two (2) iii) Condition: New, current year model iv) Horsepower: Minimum 108, Maximum 116 v) Cab: Fully enclosed with Air Conditioner and Heat vi) Drive: 4 x 4 vii) 3-Point Hitch: Category 2 viii) Power Take Off (PTO): 540 revolutions per minute ix) Transmission Shuttle Shift: Yes x) Transmission Gears: 8 with Creeper xi) Fuel Type: Diesel xii) Cylinders: 4 Cylinders xiii) Fuel Tank Capacity: Minimum 27.7 gallons, Maximum 56.8 gallons xiv) Hydraulics: Minimum 17.6 gallons, Maximum 39.6 gallons xv) Tire Size: Industry standard tire size required, examples: (1) Front: 51.1 – 78.6 (2) Rear: 53.1 - 90 xvi) Required Attachments: (1) Front Loader (2) Bucket (3) Forks
