The Statewide Procurement Division (SPD), a division of CPA, requests sealed responses for selfpropelled hydraulic 15-Ton cranes to be purchased by the Texas Department of Transportation (TXDOT). 1. SCOPE: This specification describes a 30,000-pound rated capacity, at 6 foot radius, and a 70 degree boom angle, deck type, self-propelled, hydraulic crane. Crane shall lift its rated load and carry the load on its carry deck or suspended over the front from its boom. A crane bid shall meet or exceed the latest revision of OSHA 1910.80 and ANSI B30.5. Any crane that does not comply with these standards will not be considered. Cranes furnished shall meet or exceed the following requirements. EXAMPLES Grove GCD-15 Broderson IC200 or CPA approved equal. NOTICE TO RESPONDENTS: Any example shown is listed to show type and class of equipment desired. Respondents are cautioned to read the specifications carefully, as there may be special requirements not commonly offered by the equipment manufacturer. Do not assume your standard equipment meets all detailed specifications merely because it is listed as an example. Respondents are cautioned that units delivered to the FOB points which do not meet specifications in every aspect will not be accepted. 2. CRANE DIMENSIONS 2.1. Overall chassis length, maximum: 15 ft. 8 in. 2.2. Overall width, maximum (w/o outriggers): 8 ft. 2 in. 2.3. Overall height, maximum: 8 ft. 9 in. 2.4. Undercarriage clearance, minimum: 10 in. 2.5. Wheelbase, minimum: 96 in. 3. BOOM REQUIREMENTS 3.1. Rated lifting capacity with outriggers 30,000 Lbs. (360 degree swing), minimum @ 6 -Ft. Radius
