Specifications include, but are not limited to: The work of the project is to furnish, install, and program access control. This includes card readers, electrified locksets, door position sensors, gate releases, control panels, intercoms, access control cabling, surge protection, and CCTV. The system must be compatible and interoperable with TXDOT’s latest version Software House CCURE as a standard. Furnish and provide a utility scan at each site. Refer to the specification requirements. Furnish and install pedestal: access control panels, power supplies, card readers, cabling, intercoms, camera, gate position sensors and required surge protection as indicated on the drawings and specifications. Contractor is responsible to verify all field conditions and dimensions for bidding and installation. Work at entrances shall be performed in a manor or time that will not impede vehicle ingress or egress at entrance. Perimeter fence line and building security must be maintained and property line left secure at all times.
