Specifications include, but are not limited to: Furnishing, installing and programing access control. This includes card readers, electrified locksets, door positions sensors, gate releases, control panels, intercoms, access control cabling, card reader pedestals and CCTV. The system must be compatible an interoperable with TXDOT’s latest version Software House CCURE as a standard. Furnish and proved utility scan, refer to specifications requirements. Furnish, install and program badge printer, badges, badge camera and, photo back drop as per the requirements in the specifications. Furnish and install cantilever gates, gate operators with safeties, safety loops and associated safety devices to comply with UL 325 standards. Install TXDOT furnished pedestal and pedestal bases. Furnish, install, connect and program to existing CCURE system pedestal equipment (card readers, intercoms and CCTV) as indicated on the drawings. Furnish and install an estimated 2945 linear feet of 3 strand barbed wire and top rail. Furnish and install an estimated 937 linear feet of 9ga core and 8ga finish 6ft black vinyl coated galvanized chain link fence with top rail and 3 strand barbed wire. Clear trees, bush and vines two feet of each side of fence line. Stump grinding of trees, bush and vines. Comply with local, state, and federal ordinances and laws. Contractor is responsible to verify all field conditions and dimensions for bidding and installation purposes. Work at entrance shall be performed in a manor or time that will not impede vehicle ingress or egress at entrance to facility.
