Specifications include, but are not limited to: furnish, install and program access control. This includes card readers, electrified locksets, door positions sensors, gate releases, control panels, intercoms, access control cabling, gate operator, card reader pedestals and CCTV. The system must be compatible an interoperable with TXDOT’s latest version Software House CCURE as a standard. Furnish and proved utility scan, refer to specifications requirements. Furnish, install and program badge printer, badges, badge camera and, photo back drop as per the requirements in the specifications. Install TXDOT furnished pedestal, pedestal bases. Furnish, install, connect and program to existing CCURE system pedestal equipment (card readers, intercoms and CCTV) as indicated on the drawings. Work in the project also includes demolition of an estimated 1353 linear feet of existing fencing. Furnish and install 9 gauge chain link fencing estimated 705 linear feet. Furnish and install 144 linear feet of 3 strand barbed wire and top rail. Furnish and install 6’ high density polyethylene 2” bottom lock privacy slats an estimated 462 linear feet. Furnish and install vehicle and pedestrian gates including associated hardware and operators as per the requirements in the specifications. Clear trees, bush and vines two feet of each side of fence line. Stump grinding of trees, bush and vines. Comply with local, state, and federal ordinances and laws. Contractor is responsible to verify all field conditions and dimensions for bidding and installation purposes. Work at entrance shall be performed in a manor or time that will not impede vehicle ingress or egress at entrance to facility.
