Specifications include, but are not limited to: The work of the project is to furnish, install, and program access control. This includes card readers, electrified locksets, door position sensors, gate releases, control panels, intercoms, access control cabling, gate operators, surge protection, card reader pedestals, and CCTV. The system must be compatible and interoperable with TXDOT’s latest version Software House CCURE as a standard. Furnish and provide a utility scan at each site. Refer to the specification requirements. Furnish and install cantilever gates, V track gates, gate operators with safeties, safety loops and associated safety devices to comply with UL 325 standards as indicated on the drawings. Install TXDOT furnished pedestals, pedestal base, base foundation, pedestal card readers, and pedestal cabling, intercoms, CCTV and required surge protection as indicated on the drawings and specifications. Contractor is responsible to verify all field conditions and dimensions for bidding and installation. Work at entrances shall be performed in a manor or time that will not impede vehicle ingress or egress at entrance. Perimeter fence line must be maintained and property line left secure
