a) Examples: Pioneer Prime Model PP1212S17-H b) Quantity: Two (2) c) Equipment Features: i) Pump shall evacuate saltwater with maximum 1.024 specific gravity at a minimum flow rate of 5,035 gallons per minute (GPM) with minimum head rated at 50.71 feet, net positive suction head required (NPHr) of 11.31 feet. ii) Pump shall be factory mounted horizontally on a powder coated stationary base with a maximum width of 44.5 inches x maximum length of 114.25 inches with a minimum of six 1- inch mounting holes for permanent use. iii) Pump shall be fully automatic dry priming, vacuum assisted, run dry capable, and handle heavy duty solids 3inches or larger. iv) Pump shall have both quick initial priming and continuous, unattended reprime under auto stop/start conditions. v) Pump parts shall be painted with non-Xylene base paint. vi) All Fasteners shall be 316 stainless steel imperial sizes. vii) Pump shaft shall be 2.5 inch diameter Society of Automotive Engineers (SAE)Type 630 stainless steel commonly known as 17-4 pH. viii)Impeller shall be enclosed type non-clog, with maximum diameter 17.25 inches, constructed of American Society for Testing and Materials (ASTM) A744 CD4Mcu stainless steel capable of handling 3 inches or larger. ix) Suction and discharge flanges shall be flat face 12”x12” Class 150 American National Standards Institute (ANSI) flanges made of ASTM A744 CD4Mcu stainless steel with horizontal suction.
