Net horsepower at 2400 rpm shall be at least 23.6 hp (17.6 kW) according to ISO 9249 • SAE rated gross horsepower at 2400 rpm shall be at least 24.7 hp (18.4 kW) • The machine must be CR (Compact Radius) with no overhang over the side of the tracks in the standard configuration (without counterweight) • Operating weight with the cab option shall be at least 7,982 lb. • Lift capacity max configuration without bucket fitted, blade down, and long stick shall be no less than 2,965 lb. (1,345kg) at 6’6” (2.0 m) reach and 0 ft (0 m) height over the front and no less than 2,965 lb. (1,345kg) at 6’6” (2.0 m) reach and 0 ft (0 m) height over side • Maximum digging depth with a long stick shall be at least 10’2” • Maximum digging height with a long stick shall be at least 16’5” • Maximum reach with a long stick shall be at least 18’0” • Height to top of cab shall be 8’1” • Ground clearance shall not be less than 12.2” • Transport width shall be 5’10” with 11.8” tracks • Maximum vertical wall shall be no less that 7’10” with a long stick Engine: • Engine shall be US EPA Tier 4 Final compliant • Machine shall be water cooled, 4 stroke • Engine shall have automatic engine idle that automatically lowers engine revolutions when machine is not in use to save fuel • Machine shall have sealed electrical connectors • Water separator in fuel line shall be factory installed standard equipment • Machine shall have adjustable automatic engine shutdown • Machine shall have automatic swing break
