Specifications include, but are not limited to: Texas State Technical College (TSTC) is requesting proposals to furnish and install graphics on two enclosed cargo trailers. The successful vendor will assist the TSTC design team in development of the graphics for the trailer wrap. The Vendor will provide a template with accurate layout of the trailer walls for TSTC designer to apply graphic design. The TSTC graphic designer will provide the design to the vendor in the format requested by the vendor. The vendor will provide proofs to TSTC for approval in writing prior to printing final graphics. The vendor will state on the proposal if transportation to and from vendors location is by TSTC or Vendor. Trailer #1 (Environmental Science Trailer) The enclosed cargo trailer is 10long X 5 wide. The wall dimensions to wrapped include two sides approximately 9 4 X 4 6. The rear elevation dimension is 38 X 4 3. (Photos attached) Trailer # 2 (ACT Trailer) The enclosed cargo trailer is 28 long X 8 wide. The wall dimensions to wrapped include two sides approximately 276 X 6 10.. The rear elevation dimension is 710 X 6 8. (Photos attached) - Vendor must attach a list of three references with current contact information on projects of similar size and type. - Vendor must include with the proposal, specifications on the type of material proposed for the wrap. - Vendor must state on the proposal form the type of files needed for the graphics
