Copper Cabling and Fiber Optic Specifications Unshielded Twisted Pair cable must meet or exceed the performance requirements as specified in ANSI/EIA/TIA 568- 1991 “Commercial Building Telecommunications Wiring Standard” and EIA/TIA Telecommunications Systems Bulletin TSB-36, “additional cable Specifications for Unshielded Twisted Pair Cables” and TIA/EIA TSB-40A, “Additional Transmission Specifications for Unshielded Twisted Pair Connecting Hardware.” The District requires high speed data cabling conforming to Enhanced Category 6 for data requirements. Fiber Optic cable will meet TIA/EIA – 568- B.3-1 (IOS 11801 OM4), or latest industry standard to be determined by the District, for 500 meter lengths at 10GB data rates. Fiber optic cable will consist of 24 strand fiber enhanced 10 Gig 50/125 (OM4), or latest industry standard to be determined by the District, Indoor/Outdoor (Part # FOMRZ24Y), Manufactured by Panduit Corporation. Fiber Optic Connecting Hardware Panduit fiber optic patch cord matching the fiber optic run will be supplied for each fiber connection. Each 2 fibers in the system will have a fiber patch cord supplied with it. A fiber optic patch cord must be tested and labeled according to TIA/EIA Standards. Panduit Part # for this patch cord is as follows: LC/LC Multimode Duplex Patch Cord – FZ2ERLNLNSNM002 Contractor will supply fiber optic hardware to match the fiber cable being install that is listed below: LC 10 Gig Multimode Opti-Cam Connector FLCDMCXAQY. OPTICOM Rack Mount Enclosure 1U FRME1. 2U FRME2. 3U FRME3. 4U FRME4. OPTICOM LC 10 Gig Adapter Panel 12 Pack FAP12WAQDLCZ.
