Southwest ISD is soliciting proposals from qualified vendors for cafeteria tables. 1) Convertible Table/Bench Units. Sico model T3C42 (or approved equivalent) 8’L x 29”H Mobile folding table/bench combination units. Top and bench Material: MDF Fiberboard, rigid polyethylene backer sheet with sprayed urethane edge bonded to core and topped with high pressure laminate. Tops attached to frame by expansion rivets to prevent tampering, not wood screws. Bench support vertical and horizontal tubing not less than 1 ¼” x 14-guage. End leg supports of two 2 ½” x 1 1/18” diameter oval tubing, allowing an inside dimension of 87”. Tables shall have Manufacturers serial number on the table frame. Lifetime weld warranty/15-year standard warranty. 2) Graduate Mobile/Folding Tables with 8 attached seats: Sico model STTB61 (or approved equivalent) 54” x 60” Oval table with 8 (11” x 14.25) contoured stools of one piece ribbed ABS plastic. Seat support posts shall be non-uniform shaped 16 gauge steel to inhibit seat rotation and enhance seat strength. Top core of 18mm #32 ultralight MDF Fiberboard, with sprayed urethane edge bonded to core and topped with high pressure laminate. Tops attached to frame by expansion rivets to prevent tampering, not wood screws. Frame: 14-gauge structural steel with 2” deep channel (one piece). Tubular legs of 16-guage steel with 70,000 psi yield strength with full circumference welds. Table to fold in one easy operation, assisted by Mechanical Strut Lift Assist system, steel construction, internally permanently lubricated with food-grade lubrication, 100% Ecoated (Electrophoretic dip), corrosion resistant, marked with serial number. Tables shall have Manufacturers serial number on the table frame. Limited Lifetime Warranty. 3) Graduate ADA Mobile/Folding Table with 6 attach seats and two ADA spaces: Sico model STTE61 (or approved equivalent) 54” x 60” Oval table with 8 (11” x 14.25) contoured stools of one piece ribbed ABS plastic. Seat support posts shall be non-uniform shaped 16-gauge steel to inhibit seat rotation and enhance seat strength. Top core of 18mm #32 ultralight MDF Fiberboard, with sprayed urethane edge bonded to core and topped with high pressure laminate. Tops attached to frame by expansion rivets to prevent tampering, not wood screws. Frame: 14-gauge structural steel with 2” deep channel (one piece). Tubular legs of 16-guage steel with 70,000 psi yield strength with full circumference welds. Table to fold in one easy operation, assisted by Mechanical Strut Lift Assist system of steel construction, internally permanently lubricated with food-grade lubrication, 100% E-coated (Electrophoretic dip), corrosion resistant and marked with serial number. Tables shall have Manufacturers serial number on the table frame. Limited Lifetime Warranty.