The ballistic shields shall be designed to discreetly resemble standard office or classroom fixtures, such as whiteboards, framed graphics, or framed signs. Key requirements include: Design and Concealment: o Shields must maintain a visually inconspicuous appearance, seamlessly blending with the surrounding environment when in the stowed position. o Aesthetically pleasing framing and trim are essential for effective concealment. o Shields shall be designed for wall-mounted installation with a minimum clearance of one inch from the wall surface. Durability and Safety: o Corners must be designed with impact-resistant materials to withstand accidental collisions and ensure long-term durability in high-traffic areas. Deployment: o Shields must incorporate a user-friendly, one-motion deployment mechanism with a collapsible handle that remains flush against the wall when stowed. o Handles shall be robust and provide a secure grip during deployment, measuring at least 5 inches by 2.5 inches. o An adjustable arm strap with comfortable padding is required for enhanced stability and user support during deployment. Dimensions and Weight: o Shields shall have the following approximate dimensions: 16 inches in height by 26 inches in width. Acceptable height range: 15-17 inches. Acceptable width range: 25-27 inches. o Shields shall weigh between 25 and 28 pounds to facilitate ease of handling and deployment. Ballistic Performance: o Shields must be constructed with ballistic materials that meet or exceed the National Institute of Justice (NIJ) Level III RF2 standards for ballistic resistance. o All ballistic materials utilized must be accompanied by independent laboratory test reports and certifications verifying compliance with NIJ standards. o Spall reduction coatings or materials are mandatory to minimize the risk of fragmentation upon impact. Mounting Hardware: o All necessary wall mounting hardware for secure and reliable installation of the shields shall be included with each unit.
