(a) As part of the Flow Meter Replacement Program (FRP), SAWS is soliciting bids for a Contractor to provide 106 Endress + Hauser (E+H) electromagnetic flowmeters and associated field technician services. These flow meters shall be used at the various SAWS water production facilities. The intent of this scope of services and specification is to describe the minimum requirements for the Electromagnetic Flowmeter Contract and for purchasing 106 E+H electromagnetic Proline Promag W 300/400/500 ((0 x DN)) product line flowmeters and associated field technician on site services. Meters will be installed by SAWS personnel. (b) This document provides the scope of work, outlines the process to translate order codes, and as stated, presents the specifications for the 106 flowmeters. Flow meters shall be Endress + Hauser (E+H) Proline Promag W 300/400/500 product line electromagnetic flowmeters, with no inlet and outlet runs (0 x DN), as well as no pipe restriction (full-bore design) and Heartbeat Verification for reliable fulfillment of traceability requirements in accordance with ISO 900. All specified flow meters shall also include appropriately sized grounding rings and a remote controller screen. The quantities shown are estimates only and are in no way binding upon SAWS. Estimated quantities will be used for the purpose of evaluation. SAWS may increase or decrease quantities as needed. Substitutions will not be accepted for either flow meters, remote controller screens, or grounding rings.
