Specifications include, but are not limited to: They are to be Lift Buses(D) with 2 Dedicated Wheelchair stations plus 24 ambulatory and integrated child seat passengers. There will be no minimum or maximum number of School Buses guaranteed under this indefinite delivery/indefinite quantity (IDIQ) contract. School Bus Configuration: - Lift bus (D): 2 Dedicated Wheelchair Stations + 24 ambulatory and Integrated Child Seat Passengers General: Type “C” conventional school bus o Body construction designed for exceptional students requiring a wheelchair lift o One-piece roof bows terminating just below floor level Interior: Twelve (12) removable 39” wide seats which include two integrated child seats (I.C.S) and two lap and shoulder belts. Seat spacing shall meet FMVSS 222 in a dedicated location ensuring that the seat spacing is compliant with this standard whenever seats have been removed and re-installed Minimum interior headroom 77” over plywood flooring o Interior side panels to be aluminized, scratch resistant or equivalent Marine Grade C-D 5/8” 5-layer plywood flooring for insulation o Flooring: black with continuous aluminum aisle trim o Seats shall be covered in gray fire block upholstery Hip-to-Knee space shall be 26” minimum; measured horizontally on center of seat from vertex of seat cushion and seatback to upholstery of forward seatback. Compression of upholstery shall not exceed 1” o Ribbed or pebble black elastomer step treads with non-corrosive backing and white nosing o Interior roof panels shall be perforated the full length of the bus for noise abatement