Specifications include, but are not limited to: I. Cutsheet Form Carrier A. Size: 8 ½” x 11” (overall) B. Color: White C. Weight: 28# MOCR Bond D. Ink: Forms print 1/1 black E. U-fold format. Fold marks printed in both margins at 101 mm and 196 mm. F. Carrier to be numbered consecutively in black ink in the upper right-hand corner beginning with 26000001 for year 2026. G. The vendor must guarantee that there are no missing numbers. H. The Forms carrier shall include a rectangular target frame for both the card and the decals. The card and decals shall be accurately placed within the target frame for computer registration. II. Plastic card On the form must be mounted a plastic card of a material that will withstand weathering and water splash for three (3) years without fading or flaking. Affixing of the plastic card to the carrier: The printing on the back of the card must not pull off. When card is removed from carrier, the back is not sticky, nor is the exposed surface of the adhesive. The card must stay in place and maintain its adhesion to the carrier while processing through the laser printer. Card must be a white 6 mil laser compatible, poly laser card for laser printer. The card must withstand 200-degree centigrade temperatures during the laser printing process. Card adhesive: Permanent and heat resistant to 200 degrees centigrade for laser printing. Adhesive must be of sufficient strength to hold the card in place so that the card will not roll up on the edges during the printing process. Plastic card A. Size: 3. 375 x 2.125 inches B. Thickness: A total thickness of 6 mil C. Base color: White D. Printing color front: Orange (Pantone 021) E. Printing color back: Black F. Printing area panel locations: As per sample G. Mounting location of card: As per sample H. Printing area panel to be of sufficient quality to prevent smearing or fading of printing. I. TWRA logo graphic and State outline graphic to be furnished to successful bidder. J. Cards to be applied to the form on a clear plastic liner. Samples – Bidders may contact Scott Denton at 615-837-6011 or Scott.Denton@tn.gov to obtain samples.
