Specifications include, but are not limited to: a. Pixel Design: 3 LED Pixel made up of 1 Red, 1 Blue, 1 Green Discrete Lamp LEDs b.Minimum Screen Active Area without trim: no less than 17'-10.25" high x 32-6.5" wide c.Maximum power requirement: Power not to exceed 30 watts per square foot, 48,256 watts per display at 12,000 Nit Color Corrected White Image. d.LEDs per square foot: Minimum of 1,089 LEDs per square foot e.Minimum TRUE pixel matrix: no less than 340 pixels high x 620 pixels wide f. TRUE 16mm Pixel spacing: less than or equal to .629 even spacing between each vertical and horizontal pixel g. No Pixel Sharing, Virtual Pixel or Optimized LED Technology Accepted h. 100% Sealed LED Tiles, LED PCB board coated with Silicone potting material front and back sealing the LED PCB board from moisture and contamination. i.IP Rated Power and Data Connections rated to IP-67 Standard Environmental protection. Sealed power and data connections to LED Tiles