Description: 1. Walk-In Combination Freezer and Cooler shall be located indoors on a concrete pad. 2. Total dimensions shall be 19'4" x 9'8" x 7'5" High. Nominal dimensions not accepted. 3. Insulation: 4" DURATHANE, all-urethane found foamed-in-place (Class 1). 4. Exterior: Stucco Galvanized. 5. Interior: White Stucco Galvanized. 6. Interior Floors: 1/8" Aluminum Treadplate in freezer and cooler with exterior ramps. 7. (2) 34"x76" Flush Mounted Entrance Door(s) with hardware, pilot light & switch 8. assembly, vapor proof light & dial thermometer. NSF listed. (2) Door(s) with (2) Hinges per door. Freezer to be hinged left. Cooler to be hinged right. 9. 36" High 1/8" Treadplate kickplates int & ext of door and door panel. 10. (2) LED light fixture at door. 11. (2) Exterior ramp. 12. (2) vinyl strip curtain. 13. (2) Backup frame heater wire. 14. (2) Thermostatically controlled door frame heater(s). 15. (2) Pressure relief vent. 16. (3) 48" LED light fixture(s) w/bulbs. 17. Enclosure panels. 18. Trim. 19. Cooler Refrigeration system shall have 1 HP, Remote Pre Assembled Refrig. System Model RFO100E4SDANT 208-230/60/1 Medium Temperature, base, weather hood, winter controls, Scroll, Air-cooled, R448A (7.2 Compressor RLA) with RL6A073ADASC 115/60/1 coil (1.6 amps) with Dual Speed EC motor. 20. Freezer Refrigeration system shall have 3 ½ HP, Remove Pre Assembled Refrig. System Model RFO350L4SDA 208-230/60/1 Low Temperature, base, weather hood, winter controls, Scroll, Air-cooled, R448A, Std. Defrost Kit (18.6 Compressor RLA) with RL6E090DDASC 208-230/60/1 coil (1.0 fan amps, 9.8 heater amps) with Dual Speed EC motor. 21. Ten year panel warranty. 22. Five year compressor and one year refrigeration parts warranty. One year installation labor warranty.
