Specifications include, but are not limited to: 1 Police Uniform – Class A Style Trousers Material used must be primarily polyester. Trousers are to have no less than six (6) pockets (quarter top pockets, hip pockets and MUST have hidden cargo pockets with zipper) and flex waistband. Trousers are to be dark navy in color. Zipper fly needs to be of high quality manufacture and length coinciding with pant size. All trousers must have permanent leg creases front and back and MUST be machine washable. Uniform Examples: Blauer Class Act or 6 Pocket Blend Trouser, Elbeco CX360, Flying Cross Justice Power Stretch 2 Police Uniform – Class A Style Shirts Shirts shall have seven (7) buttons and buttonholes on the front with spacing between each at approximately 3 ¾” except for the spacing between the neck button and first button which shall be approximately 3 ¼”. A hidden zipper front closure of quality manufacture will be set below the second button and button hole and run down to the bottom button. The top, second, and bottom buttons will be attached to the right front, the balance to be sewn over the buttonholes on the left front. Convertible sport collar on short sleeve and Marine Corps style on long sleeve shirts. Two pleated patch pockets on breast of shirt front with Velcro closure map pockets. Military style permanent creases both front and back and MUST be machine washable. Shirts are to be of matching trouser color. Please provide pricing for both long and short sleeved shirts. Uniform Examples: Blauer Class Act, Supershirt Class Act, or FlexRS Supershirt, Elbeco CX360, & Flying Cross Justice Power Stretch 3 Police Uniform – Class A Style Shirts for Outer Carrier Vests – Shirts shall have 3 buttons and button holes on the front with spacing between each at approximately 3 ¾” except for the spacing between the neck button and first button which shall be approximately 3 ¼”. Convertible sport collar on short sleeve and Marine Corps style on long sleeve shirts. Two pleated patch pockets on breast of shirt front with Velcro closure map pockets. Shirts must be of matching trouser color. Please provide pricing for both long and short sleeved shirts. Uniform Examples: Blauer Polyester Armorskin Base Shirt, Blauer FlexRS Armorskin Base Shirt, Blauer Armorskin Winter Base Shirt, Elbeco UV1 CX360 Undervest Shirt a. Short Sleeve: b. Long Sleeve: 4 Police Uniform – Class B Style Trouser for K9 and Litter Crew – Uniform trousers shall be of durable material. Cargo style trousers to be navy in color. Material must be a 65% polyester and 35% cotton ripstop that is fade, shrink, and wrinkle resistant. Trousers are to have no less than nine (9) pockets and a stretch waistband. Trouser colors needed are dark navy and black. Zipper fly must be of high quality manufacture with length coinciding with pant size. Example: Propper F5252-50 5 Police Uniform – Class B Style Shirts for K9 and Litter Crew – Uniform shirts shall be of a durable material to match trouser color. Must be of same material and matching color as trousers. Shirts must have a hidden zipper mock button-up front for ease of use. At least two (2) chest pockets and hidden document storage pockets are required. Pricing shall be included in shirt pricing • All shirts shall have Morristown Police Department patch sewn on left sleeve and an American Flag sewn on right sleeve • Either direct embroidered Morristown Police badge or pre- embroidered badge applied above left pocket • All shirts will have either name strips or names (first initial and last name) direct embroidered above right pocket Please provide pricing for both long and short sleeved shirts. Either K-9, M.P.D., or rank will be embroidered on collar (color coded to name strip) Master Officer (blue, black, and white private stripes), Corporal (black and gold), or Sergeant (black and gold) will be sewn on each sleeve
