The objective of this project is to completely renovate/resurface and restripe the tennis courts at Fischer Park. The existing tennis court will need to be striped for tennis and basketball games. The park consists of two (2) tennis courts lined with 4 basketball courts with free throw and keys lines. 1. Prepare Surface a. Secure tennis complex from public use by blocking access to the courts during construction/renovation period in coordination with the City of Spring Hill. The site should be kept clean, neat, and free of unnecessary debris throughout the construction renovation period. b. Remove and securely store tennis nets for reinstallation at the end of the project. c. Remove dirt, dust, debris, oil, grease, vegetation, loose materials and other surface contaminants which could adversely affect application of asphalt tennis court surface coating system. d. Pressure wash entire surface using a 4,000 psi or greater surface washer. (A water connection will be made available to the contractor). 2. Repair Surface a. cracks, depressions, and surface defects. b. In areas where previous attempts have been made to correct defects, remove all material which is not compatible with the repair products being utilized. c. Flood court surfaces to find depressions which are 1/16 inches (2mm) and deeper d. Any area where standing water is measured at 1/16”, level with a patch grinder and grind to smooth and level grad with playing surface e. Repair all cracks using an acrylic patch binder 3. Apply Resurface a. Apply at least one (1) coat of acrylic filler course (“resurfacer”) as required by surface roughness and porosity to provide a smooth underlayment for application of color coating. (In areas where extensive surface repair is required, apply two (2) coats of resurfacer b. Resurface products should be mixed and applied in accordance with the manufacturer’s instructions. 4. Apply Color Coating System a. Apply a minimum of two (2) coats of acrylic color coating to the prepared surfaces so as to provide a medium speed playing surface b. Color coating system should be mixed and applied in accordance with the manufacturer’s instructions c. Acrylic emulsion coating must be designed for tennis courts and other sport and recreational pavement surfaces. d. A one (1) color application will be used. e. The awarded contractor must submit standard color samples available for selection by the City of Spring Hill Parks Maintenance Superintendent. 5. Line Tape Primer a. Masked lines shall be primed with acrylic primer to seal the void between the textured surface and masking tape edge.
