Specifications include, but are not limited to: Salt Brine Trailer Specifications • Dimensions: 14’ long x 6’ 10” wide G.V.W.R. - 14,000 lb. • Bed trailer dimensions: 139” long x 6’ 10” wide (between the inside of the fenders) • Trailer frame to be made from steel, 7” X 9.8 lb. channel. • Tongue to be made from 7” X 9.8 lb. continuous frame and tongue channel wrap around design, 48” long with mesh floor between tongue rails ¾” x #9 expanded metal. • Install 3 tabs on each side for attachment of tank straps. 10” tall X 2” wide, ¼” thick flat steel, bent at top 90 degrees with ¾” hole. • Cross members: (6) each- 6” X 8.2lb. channel. Open center no floor. • Tongue jack design is drop leg with a sand foot Minimum of 7,000 lb., mounted toward the trailer frame end of the tongue. • Fenders and fender backs: 10” wide Diamond plate tear drop or Jeep style. • Walkway on each side: ¾ # 9 expanded metal with 2” x 1/4” flat trim attached to fenders front and back coming in toward trailer frame. 10” wide x 26” long in front of fender. 10” wide X 46” long behind fender. • Back Walkway: ¾” # 9 expanded metal with 2” x 1/4” flat trim. Size 68” x 37 1/4”.