Specifications include, but are not limited to: The work will consist of pavement marking services on an “as needed” basis. This work shall consist of furnishing, supplying, and installing pavement markings to be applied on asphaltic concrete surfaces at the direction of the Engineering Department. Measurement (a) Pavement Marking (Line) - The mileage of line complete in place and accepted, shall be measured along the center of each line. Where double solid barrier lines are used, each solid barrier line will be measured separately for payment. Where broken lane lines are used, only the marked line will be measured for payment. For quantities of Pavement Marking (Line) less than one mile, the accepted method of measurement shall be linear feet. (b) Pavement Marking (Crosswalk Striping) and Pavement Marking (Stop Bar) - The length of each striping complete in place and accepted will be measured in linear feet to the nearest foot along the center line of each pavement marking. (c) Pavement Marking (Channelization Striping) - The area of channelization striping including the boundary lines complete in place and accepted shall be measured and computed in square yards to the nearest square yard. (d) Pavement Marking (Designs) - Designs or lettering will be measured for payment by the unit (each) complete in place or as stipulated in the Contract and on the Plans. (e) Pavement Marking (Raised Reflective) and Pavement Marking (Snowplowable Reflective) - The number of each type of pavement markers installed as directed and accepted will be counted separately for payment. (f) Removal of Existing Painted Line- The removal of broken lane line and solid barrier line will be measured along the center of each line. Only the painted line will be measured for payment.
