Bidder must supply all necessary materials to install a temporary traffic signal and roadway markings, to include but not be limited to: Wood or metal poles with overhead wiring (including guy wires as needed) Install temporary traffic signal – timings should be set according to the signal timing and phasing diagrams as shown in the attached traffic signal Synchro analysis Install stop bars on both approaches on Nolensville Road and remove centerline extension as shown on the attached conceptual figure from JMT (Exhibit B) Install one (1) pavement loops on Kidd Road located near the stop bar Conduit Cables Econolite Cobalt C – COBC2010000000000; Shelf Mount; EOS Software Signal Heads Traffic Control during construction Should any TDOT permits be required for work, the contractor shall be responsible for obtaining permits The contractor shall follow the conceptual guide from JTM attached to this document for all roadway and intersection improvements associated with the temporary traffic signal.
