Specifications include, but are not limited to: 1. Install magnetic locking system on X7 interior and exterior doors outlined in Figure 1.; 2. Magnetic locks should have a holding capacity of no less than 1,200lb; 3. Each door should be equipped with number pad access, badge access, as well as biometric (fingerprint) access.; 4. Systems must support one or more of the following ID types: HID 125 KHz Format Prox 26 bit (preferred), format H10301 Prox 36 bit, except format H10302. iClass Smart Card (26 bit); 5. System must include request to exit motion sensor on all doors as well as a push to exit button.; 6. System bust be capable of allowing remote access to lock/unlock, set schedules, and monitor access.; 7. Bidder must integrate system into existing fire panel.; 8. Bidder to provide training and 100 blank ID cards of a supported type upon completion
