Specifications include, but are not limited to: Install approximately 128 Linear Feet of new 7-ft high picket metal fencing. Fence and a 28 foot gate shall be greater or equal to Aegis II-"Invincible 3-Rail" style by Ameristar. The system shall consist of all components including, but not limited to, the following: pickets, rails, posts, gates, gate ends, and hardware. Install a STANDALONE KEYPAD WITH 400 MEMORY access control system with a Al phone connected to the to the AFRC with a 7 inch monitor. POWER CIRCUIT (120 OR 240V/SINGLE PH) TO BE PROVIDED AT GATE with LOW VOLTAGE CONDUIT (2" PVS) WITH PULL STRING FROM BUILDING TO GATE TO BE PROVIDED by the contractor. SYSTEM DESCRIPTION: Fence and gate shall be greater or equal to Aegis II-"Invincible 3-Rail" style by Ameristar. The system shall consist of all components including, but not limited to, the following: pickets, rails, posts, gates, gate ends, and hardware.Fence and Gate Height: 7 feet nominal. Line Post Spacing: At intervals not exceeding 8 feet. Cantilever Gate: Motor operated, for 28 feet opening equal to Ameristar " Transport" type ornamental design with "Invincible 3-Rail" style. Heavy Duty Gate Operator: Gear reduced slide gate operator shall be greater or equal to Model SL580 "Slide" by Sentex Systems. Gate operator shall be UL325 listed. Gate operator shall include lockable weatherproof steel cover with same finish as fences. Gate operator shall have motor power of 1 HP. Gate operator shall include loop detectors. Gate operator shall be able to operate manually from within the readiness center which is 350ft away as well as automatically open when activated by key pad with a 42" BLACK GOOSENECK STAND and CONCRETE PAD FOR GOOSENECK STAND. CONCRETE PAD FOR OPERATOR (1) FREE EGRESS DETECTOR LOOP (1) REVERSING DETECTOR LOOP.
