The purpose of this Request for Proposal (RFP) is to establish a multi-year contract with a contractor to provide the design, fabrication, repairs, and installation of interior and exterior signage/flags. * Contractor shall furnish to Metro all interior and exterior signs and flags in different sizes including but not limited to: flags, flag cases, flag poles, flag rope, flag cables, signs, sign engraving, wall mounted and overhead directional signage, flag mounted directional, room identification, restrooms, conference rooms, workstation ID's, magnetic vinyl cling, vehicle signage and any other necessary signage. The contractor shall submit designs to Metro for approval before the start of any job. * Contractor shall furnish all material, labor, design services, installation, equipment including lifts and any other necessary equipment/tools to fabricate and install all signage and flags. * Contractor shall prepare sign plans, specifications, and artwork suitable for sign fabrication that includes material, colors, font, size, etc. * Upon request from Metro, contractor shall remove and replace existing signs, fabricate and install new signs as specified and requested by the requesting Metro Department. * Contractor shall supply and use only new, high quality material, brackets, and mounting hardware. * Contractor will be responsible on furnishing all needed tools and labor necessary to complete any project. * Contractor shall provide a one-year minimum parts and labor warranty on the new sign fabrication and installation. During the first year after installation of new signage, contractor shall repair or replace any faded, damaged, or crooked signs that are caused by poor fabrication methods or installation techniques at no cost to Metro.
