DESCRIPTION DENIM FABRIC (USED TO MANUFACTURE UNIFORM JEANS AND JACKETS) FIBER CONTENT 100% COTTON (+/- 3% tolerance) *TEST METHOD AATCC 20A THREAD COUNT WARP: 68 MINIMUM FILL: 42 MINIMUM *TEST METHOD ASTM D3775 CONSTRUCTION 2 X 1 TWILL YARN DYED WEIGHT 10 OZ PER SQUARE YARD (+/- 3% tolerance *TEST METHOD ASTM D3776/D3776M WIDTH 60” - 62” (60” MINIMUM CUTTABLE) ROLL SIZE NOT TO EXCEED 200 YARDS PER ROLL SHRINKAGE 5% MAXIMUM AFTER THREE MACHINE WASHES AT 170 DEGREES *TEST METHOD AATCC96, Test IVC, Drying A, Modified PACKAGING PACKAGING SHALL BE OF INDUSTRY STANDARD. EACH PACKAGE SHALL BE UNIFORM IN SIZE, QUANTITY, AND WEIGHT AND SHALL BE CLEARLY LABELED AS TO CONTENTS. EACH PACKAGE SHALL BE WRAPPED WITH MATERIAL THAT WILL PROTECT THE PRODUCT FROM DIRT, DUST, MOISTURE AND HANDLING DAMAGE THAT IS COMMONLY EXPERIENCED IN THE TRANSPORTATION, HANDLING AND STORAGE OF THIS TYPE OF PRODUCT. QUALITY SHALL ONLY BE GRADE (A) OF THE FIRST QUALITY OF MANUFACTURED STANDARDS FOR THIS MATERIAL. SECONDS OR ANY OTHER THAN GRADE A QUALITY WILL NOT BE ACCEPTED. IF IMPORTED, MUST PROVIDE COUNTRY OF ORIGIN. NOTE: GRADE (A) MATERIAL OR MATERIAL SUPPLIED AS GRADE (A) THAT CONTAINS THE FOLLOWING: SLUGS, THIN PLACES THROUGHOUT, HOLES ON THE SELVEGE EDGE, DROPPED STITCHES, DIRT SPOTS AND HOLES, SPICES, BIRD EYES, OIL STAINS, BROKEN WEAVE, OTHER TYPES OF THREAD WOVEN IN TO THE MATERIAL, AND ½” OR MORE CUT IN THE MATERIAL. SELVEGE EDGE MUST BE SMOOTH (NOT RAVELED) WILL NOT BE ACCEPTABLE AND WILL BE RETURNED. ACCEPTANCE RECEIPT OF GOODS AT OUR FACILITY DOES NOT CONSTITUTE ACCEPTANCE. ALL GOODS ARE SUBJECT TO TESTING AND EVALUATION AFTER RECEIPT. GOODS NOT TO SPECIFICATION WILL BE REJECTED AND RETURNED TO THE VENDOR WILL ALL ASSOCIATED COSTS AT THE VENDOR’S EXPENSE. SWATCH FOLIOS A COLOR SAMPLE IS SUPPLIED FOR EACH COLOR USED BY TRICOR WITH THIS BID FOR A COLOR MATCH. PLEASE SUBMIT A SWATCH CARD WITH YOUR BID OF MATCHING OR A SMALL SAMPLE DEMONSTRATING YOUR MATCHING COLORS. EACH SAMPLE INCLUDED FOR TESTING SHOULD BE AT LEAST TWO (2) SQUARE YARDS MINIMUM. NON-TEST SAMPLES MAY BE LESS THAN ONE (1) SQUARE FOOT IN SIZE.
