Specifications include, but are not limited to: The purpose of this RFP is to establish a contract with a qualified vendor for the design and installation of playground structures. The resulting contract from this RFP will provide three playground structure designs and installations to the City. 1. All play equipment must meet the current ASTM, CPSC, ADAAG, and IPEMA guidelines. Third-party certification (i.e., IPEMA) shall be submitted with bid. Evidence of compliance for all components contained within proposed designs will be reviewed during the selection process prior to award. 2. All designs shall illustrate each component name and part number. 3. Five-inch O.D. aluminum or steel support posts for all composite structures and swings. 4. Crawl tunnels and tunnel slides shall be a minimum of 30 inches in diameter. 5. Equipment fall heights shall not exceed 10 feet. 6. Hardware shall be tamper-resistant stainless steel. 7. Heavy rubber wear mats beneath all belt swings.