Specifications include, but are not limited to: 1. Capacity: 750 lbs (340 kg) rated capacity. 2. Mast Height: ➢ Existing travel of 112 inches. Potential Offerors must verify at the site visit. 3. Nominal Clear Platform Dimensions: ➢ Existing platform clear dimensions of 32 inches wide and 60 inches deep will be required. 4. Platform Configuration: ➢ Straight Through Entry/Exit: Front and rear openings. 5. Landing Openings: ➢ Upper Landing: Door ; 6. Doors and Gates: Doors shall be self-closing type. ➢ Door Height: Flush mount, 80 inches (2032 mm). ➢ Door Construction: Aluminum frame with: • Panels of 1/4 inch (6 mm) laminated safety glass with 16 gauge (1.5 mm) galvanized steel kick plate. • D-Handle Pull: 12 inch (305 mm) offset D-Handle. • Low voltage, 24 VDC with all wiring concealed. 7. Lift Components: ➢ Machine Tower: Custom aluminum extrusion. ➢ Base Frame: Structural steel. ➢ Platform Side Wall Panels: 42-1/8 (1070 mm) inches high. 16 gauge (1.5 mm) galvanized steel sheet. Custom aluminum extrusion tubing frame. ➢ Enclosure Panels: • 1/4 inch (6 mm) laminated safety glass.