Specifications include, but are not limited to: FRONT SUSPENSION Front springs should be a heavy-duty, taper leaf design, 54.00" long by 4.00" wide, with a ground rating for the weight of apparatus. SHOCK ABSORBERS Heavy-duty telescoping shock absorbers should be provided on the front axle. OIL SEALS Oil seals with viewing window should be provided on the front axle. FRONT TIRES The tires should be mounted on Alcoa polished aluminum disc-type wheels with a ten (10)-stud, 11.25" bolt circle. REAR AXLE The rear axle should be a Meritor™ or Dana™ REAR SUSPENSION The rear springs should be semi-elliptical, 3.00" x 52.00", 12 leaves with a ground rating for the weight of the apparatus. Spring hangers should be castings with provisions for lubrication. The grease fittings should be 90-degree type and should be accessible without removing the wheels or cutting any sheet metal. Two (2) top leaves should wrap the forward spring hanger pin and the top leaf should wrap the rear spring hanger pin on both the front and rear suspensions. OIL SEALS Oil seals should be provided on the rear axle. REAR TIRES The tires should be mounted on Alcoa “polished aluminum disc wheels with a ten (10)-stud 11.25" bolt circle.