Specifications include, but are not limited to: 1. Remove existing damaged unreinforced masonry (URM) and veneer to the extent that no damage is
noticeable and no horizontal deflections occur (approximately 810 feet from South side of damaged roll
a. Demo shall include URM below grade to expose the existing footing necessary for installation
of new wall per sections
b. The installation site shall be kept clean and free from any accumulation of debris or building
materials during the removal and installation process.
2. Provide one (1) vertical #5 bar in three adjacent cells abutting new roll-up door to support new door and
a. Attach new door to new CMU wall per manufacturer’s installations. The two adjacent
reinforced cells shall be fully grouted for full height of the wall.
3. Provide two (2) Longitudinal W1.7 ladder type horizontal reinforcing @ 16” O.C.
4. Provide #5 bar @ 24” O.C. thereafter. Fully grout cells with vertical reinforcing.
5. Provide #5 bars in two adjacent cells at the end of new CMU wall. New CMU wall shall terminate flush
to undamaged existing wall to remain