Specifications include, but are not limited to: A Screenings compactor to replace an existing unit to include motor, gearbox, screw and press body. B Parkson model # RP-200 Rotopress Screenings Compactor, or SCDC approved equal prior to acceptance of bid, to include the following items: Unit must have overall dimensions of approximately 1.75’ H by 3.5” L by 2.5’ W Approximate weight is 550 pounds Unit must be capable of handling 60 cu. Ft/hour of screenings. Unit must have the following connection sizes: Feed: 16” x 9” (approx.) (flanged) Filtrate outlet: 3” diameter (approx.) Trash outlet: 10” diameter (approx.) Materials of construction must be as follows: Press housing: Type 304 stainless steel Shaft/screw: Type 304 stainless steel Splash guard: Type 304 stainless steel Spray bar: Type 304 stainless steel Drive unit must be a helical-worm gear reducer 78.91:1 ratio, hollow shaft with a shrink disc. The unit must be driven by a 2 HP motor, 230/460/V, 3φ, 6Hz. The Rotopress unit must be factory assembled and tested, and must be shipped to the job site fully assembled. No field assembly required (except for chutes and piping).