Specifications include, but are not limited to: 1.0 Material Specifications The Contractor shall furnish and install all new equipment including illuminated signs, photocells, mounting hardware, power conductors, ground wire, conduit, circuit breaker boxes, circuit breakers and all incidental items. Sign Face The sign shall be signal sided only, sign face will be green with white lettering and a white border. The letter height shall be 12” for capital letters and 9” lower case letters for signs with one street name. For stacked signs, in which two street names are placed on the same sign, the letter height shall be 10” for capital letters and 8” for lower case letters. Sign faces shall be designed using only current MUTCD approved fonts and font sizes. The contractor shall have the manufacturer design the sign face for approval by the Engineer prior to fabricating and installing the signs. The sign shall have a front panel that is UV, weather, abrasion and impact resistant. The Sign shall face shall utilize weather and impact resistant materials to prevent fading, out−gassing, bubbling, peeling, and cracking.