Specifications include, but are not limited to: Foundation: Builder’s choice to build on a crawl space or a slab. Footings: Concrete mix 1:3:5-strength PSI 2500-pound minimum. Piers: Concrete block, block to be capped with solid block. (Slab to have brick walls minimum 12” high from finish grade elevation.) Access Door: Frame: Treated, 2” thickness, Door: ½" exterior plywood (or treated 5/4 board) with ¾” batten, hinges and hasp Foundation Vents: 16” x 8” automatic Foundation Wall: Material: Brick, Contractor to allow $250 per cube of brick. Brick to be approved by Construction Specialist prior to installation. Deck/patio: Approximately 8 x 10’ Construct deck and steps using lumber that is #2 pressure-treated Southern Yellow Pine (SYP). Install 4” x 4” newel posts at the base of the steps and set in 12” of concrete. Construct steps with closed risers. Provide and install a 2 x 2 picket handrail around the perimeter of the deck and down both sides of the 48” wide steps. Composite board top rail, Trek © or equivalent Partition Framing: Studs: Wood, #2 SPF Size & Spacing: 2” x 4” – 16” o.c. Height: Walls should be framed for an 8’ ceiling, per plan.