Specifications include, but are not limited to: This solicitation was developed to obtain qualified bidders to complete the manufacturing and delivery of thirty-yard rectangular roll off cans, and forty-yard rectangular roll off cans. The budget for this project is $35,000, and quantity ordered will be determined after bids are received. Listed specs (see Section 2.2) are for equipment currently utilized. Specifications should be adhered to as closely as possible; however, quotes for similar items will be accepted as long as exceptions to spec are provided in detail in a section of the bid listed as “Exceptions to Provided Specifications”. Bids are for equipment only, no installation required. All equipment must meet ANSI Z245.2 regulations and OSHA requirement. Please specify approximate delivery times and note if delivery charges are included in the quote. Sales tax will be listed as a separate line item. Warranty and service information, including service center locations and turnaround times, must be included in bid. 3.2 SCOPE AND SPECIFICATIONS. Thirty (30) and Forty (40) yard Rectangular Roll Off Container: Understructure Cross Members – 3” channel on 16” center 2 Gussets per Cross Member Main Rails – 2” x 6” tubing 3/16” walls with solid bull nose Pull Hook – 1.5” W x 5.5” H x 2.5” eye opening Floor – 3/16” steel plate Wheels – two (2) 8” diameter x 6” long with grease fitting Guide rollers – 4” diameter x 6” long with recessed grease fitting Sides and Front – 12 gauge Top Cap – 4” x 3” x 11 gauge wall tubing Side Ribs – 3” x 5” channel on 38” centers Hinges – 2 heavy duty hinges with grease fitting Rear Door – 3 point latch and safety chain Canvas Tie Down – each side, front, and door Paint – Primer inside and outside 2.0 mils, Industrial enamel finish to 2.0 mils Green Color