Specifications include, but are not limited to: a. The apparatus must be capable of accelerating to 40 MPH from a standing start within 25 seconds on a level concrete highway without exceeding the maximum governed engine RPM. b. The service brakes shall be capable of stopping the fully loaded vehicle within 35 feet from a speed of 25 MPH on a level concrete highway. c. The apparatus, fully loaded, shall be capable of obtaining a speed of 60 MPH on a level highway with the engine not exceeding 95% of its governed RPM (full load). d. The apparatus shall be tested and approved by a qualified testing agency in accordance with their standard practices for pumping engines. e. The contractor shall furnish copies of the Pump Manufacturer's Certification of Hydrostatic Test (if applicable), the Engine Manufacturer's current Certified Brake Horsepower Curve and the Manufacturer's Record of Construction Details.