Specifications include, but are not limited to: (1) Chemistry Analyzer Beckman Coulter DxC700 AU with ISE Preferred Must be able to provide all current chemistry test that are currently ran (CMP, LFTS, LIPIDS, TDMS, CRP, URINES, ETC.) and be able to add additional test as deemed necessary All control material should be included Must be able to bill on a metered reagent plan Instrument should be able to calibrate and QC multiple lots of reagents simultaneously Instrument must be able to calibrate and run specimens at the same time Instrument should have little to no daily maintenance Reboot of instrument should not lose any calibration information Electronic maintenance logs should be included Temperature controlled ISE module should be included Close tube sampling/cap piercer should be included for safety and all blades be provided as necessary at no cost Instrument should have a clot detection mechanism; Hematology Analyzer Beckman Coulter Unicel DxH600 Preferred Automated sampling handling, including mixing and cap-piercing Must be able to automatically mix, sample, and analyzed calibration and control materials Must have a fail-safe sample management system for positive tube identification (read bar-code if available at time of aspiration) and positive rack/position identification at the time of aspiration Specimen integrity check during and after aspiration Have 2 identification fields which can be alphanumeric or alpha or numeric to enter inmate name and number Must directly measure MCV Must provide differential analysis using technology in order to maximize resolution, specificity, and efficiency Must be able to provide a differential on WBC equal or greater than 100 cells/UL